Ayan Hydraulics
Odhav, Ahmedabad, Gujarat
GST No. 24AGWPT9125B1Z2
Call 07949351389 82% Response Rate
Send Enquiry
Air Blow Gun
Real Blow Jet, PSH -7 + HTB-4, Compressed air saving, High Thrust blow nozzle
Minimum Order Quantity: 1 Piece
Product Brochure
| Body Material | Plastic |
| Nozzle Length | 75 |
| Inlet Size | 1/4 inch |
| Maximum Operating Pressure | 10 Bar (145 PSI) |
| Nozzle Type | High Thrust |
| Safety Compliance | OSHA Compliant |
| Application | Surface Drying, Dust Blowing, Part Cleaning, Chip Removal, Foundries, Textile Mills, Assembly Lines, Service Stations |
Name : Real Blow jet, HTB-4
Type : Add on nozzles for ergonomic blow gun PSH-7.
Can be used with different nozzles : No
Blow Type : High thrust, High penetration, low amplification.
MOC : Stainless Steel
Air Amplification : 3-4 times the compressed air consumed.
Noise Level : 99 db
Air Consumption : 396 LPM (14 CFM)
Thrust @ 300 mm : 340 grams
Payback period : 30 - 40 working hours. Calculate your payback period Click here
Confirms OSHA safety requirements : Yes.
Available attachments and accessories : None
Inlet connection Size : 1/8" BSP male thread.
Additional Information:
- Delivery Time: 1 WEEK
- Packaging Details: STANDARD
View Complete details
AIR BLOW GUN PSH-7 + RBD-7
Minimum Order Quantity: 1 Piece
Product Brochure
| Body Material | Plastic |
| Nozzle Length | 300 |
| Inlet Size | 1/4 inch |
| Maximum Operating Pressure | 10 Bar (145 PSI) |
| Application | Service Stations, Foundries, Surface Drying, Part Cleaning, Textile Mills, Assembly Lines, Dust Blowing, Chip Removal |
Die Cleaning and Core shooting gun: Die cleaning and core shooting guns are designed and developed keeping investment casting, shell - core casting and other new technology foundries. We provide various length of nozzles as per customer requirement.
Our market survey shows that foundries saves lots of money over replacement of guns and also due to reduction in leakage of compressed air. Just like any other air amplifying blow guns, our this conventional gun also has very low payback period.
Compressed air is the most expensive utility in an industry, to l earn more about the cost of compressed air and how GIPL products can help you to save cost, click here.
We also offer Ergonomic Blow Gun, PSH-7 which can be fitted with High thrust nozzle, Adjustable blow nozzle, high volume - high penetration blow pipes.
If your work area require very wide and high volume blow, eX blow gun is best choice.
Additional Information:
- Delivery Time: 1 WEEK
- Packaging Details: STANDARD
View Complete details
Real Blow Jet, PSH -7 + RBP-5, AIR GUN, High Thrust blow nozzle
Minimum Order Quantity: 1 Piece
| Body Material | Plastic |
| Nozzle Length | 25 mm |
| Inlet Size | 1/4 inch |
| Maximum Operating Pressure | 10 Bar (145 PSI) |
| Nozzle Type | High Thrust |
| Application | Service Stations, Part Cleaning, Chip Removal, Textile Mills, Assembly Lines, Foundries, Dust Blowing, Surface Drying |
Name : Real Blow jet, PSH-7 + RBP-5
Type : Add on nozzles for ergonomic blow gun PSH-7.
Can be used with different nozzles : No
Blow Type : High thrust, High penetration, low amplification.
MOC : Stainless Steel
Air Amplification : 3-4 times the compressed air consumed.
Noise Level : 99 db
Air Consumption : 396 LPM (14 CFM)
Thrust @ 300 mm : 340 grams
Payback period : 30 - 40 working hours. Calculate your payback period Click here
Confirms OSHA safety requirements : Yes.
Available attachments and accessories : None
Inlet connection Size : 1/8" BSP male thread.
Additional Information:
- Delivery Time: 1 week
- Packaging Details: standard
View Complete details
Air Blow Gun PSH-7 + CTF-16
| Body Material | Plastic |
| Nozzle Length | 25 mm |
| Inlet Size | 1/2 inch |
| Maximum Operating Pressure | 10 Bar (145 PSI) |
Name : Real Blow jet, HTB-4
Type : Add on nozzles for ergonomic blow gun PSH-7.
Can be used with different nozzles : No
Blow Type : High thrust, High penetration, low amplification.
MOC : Stainless Steel
Air Amplification : 3-4 times the compressed air consumed.
Noise Level : 99 db
Air Consumption : 396 LPM (14 CFM)
Thrust @ 300 mm : 340 grams
Payback period : 30 - 40 working hours. Calculate your payback period Click here
Confirms OSHA safety requirements : Yes.
Available attachments and accessories : None
Inlet connection Size : 1/8" BSP male thread.
View Complete details
EXPLORE MORE CATEGORIES